Seamless gutter installation
When the old gutters leak at every joint or droop between hangers, new seamless runs are formed on site to fit each wall.
Seamless gutters are made in the driveway. A forming machine on the installer's truck shapes a coil of painted aluminum into one continuous piece, cut to the length of each wall. Straight runs have no joints at all, so the only seams are at the corners and downspout outlets.
When is it time for new gutters?
- Joints that start dripping again soon after they're resealed
- Sections that hold water or sag between hangers
- Rusty steel or cracked, brittle vinyl after a few cold winters
- Overflow in normal rain even when the gutters are clean
- Soft or rotting fascia behind the gutter
- A new roof on the schedule, the easiest time to change gutters
Should I get 5-inch or 6-inch?
Five-inch K-style is the most common size on houses. Six-inch gutters carry a lot more water and suit big or steep roof planes, long runs, and corners where a valley pours in. They're usually paired with 3-by-4-inch downspouts, which clog less too. Ask the installer to explain the size chosen for each side of the house rather than using one size everywhere.
Which material holds up best here?
- Aluminum. The default. Doesn't rust, comes in many colors and forms into seamless runs.
- Copper. Long-lived and attractive, often in half-round profiles on older homes near downtown Blacksburg and Christiansburg.
- Steel. Strong and stiff, which helps under snow, but it can rust once the finish wears.
- Vinyl. Inexpensive, but more prone to cracking in hard cold, and the New River Valley gets plenty of it.
What does a good installation include?
- Each run pitched slightly toward a downspout so water never sits
- Hidden hangers spaced closely enough to carry snow and ice
- Enough downspouts for the roof area, placed at the low ends
- Rotten fascia replaced before anything goes up
- Downspouts that empty well away from the foundation
What drives the cost of new gutters?
- Total footage and number of downspouts.
- Size and material. Six-inch and copper cost more than 5-inch aluminum.
- Height, roof pitch and access.
- Removing old gutters and repairing wood.
- Guards. Adding them during installation usually costs less than adding them later.
We don't give prices. The installer prices the job after measuring each gutter run, counting downspouts and seeing how tall and steep the roof is, so a figure quoted sight unseen wouldn't mean much.
Where we connect you with help
Common questions
Do I need a permit to replace gutters in Blacksburg?
Virginia's building code doesn't mention gutters, and it lets the building official exempt minor work. Ask the Town of Blacksburg, the Town of Christiansburg or Montgomery County, depending on where you live, and check first in the Blacksburg Historic District.
Should rotten fascia be fixed before new gutters?
Yes. Hangers need solid wood, and new gutters screwed into soft fascia will pull loose, especially under snow.
Related services
More background: New River Valley gutter guard guide.
Tired of scooping out gutters every fall?
Call and we'll pass your address to a gutter guard installer who works in Blacksburg, Christiansburg or nearby, who can come measure and quote.